REBARS.xls
(5/6)
Description
Reinforcing Bar Development and Splice Lengths per ACI 318-99
"XBRACING.xls" is a MS-Excel spreadsheet workbook for the
analysis of vertical bents with tension-only X-bracing. The workbook
contains 10 calculation worksheets, one each for bents from 1-story
through 10-stories high. The user inputs the story heights, bent
width, and lateral loads applied to each story or strut level. The
program determines all of the member (segment) forces, as well as the
horizontal and vertical reactions at the supports, and the individual
story drifts (horizontal deflections).
"Old timers" can
certainly remember the days when one drew a sketch of the braced bent
and traced the loads/forces down through the braced bent. Well, this
does it much faster for you, plus you get a good estimate of the
deflections (story drifts) as well. For preliminary designs and
estimates this is still much faster than structure modeling using
computer software.
All the worksheets are independent and self
contained, so that you can move them from one workbook to another. All
the worksheets are protected, but not with a password.
Please read the "DOC" worksheet for program details as well as assumptions and limitations.
This repository also contains "REBARS (318-05).xls" which uses ACI 318-05 Code.
Calculation Reference
ACI 318-99 Building Code
Calculation Preview
(5/6)
Full download access to any calculation is available to users with a paid or awarded subscription (XLC Pro).
Subscriptions are free to contributors to the site, alternatively they can be purchased.
Click here for information on subscriptions.
