Weld line assessment - C shaped.xls
![](/components/com_remository_files/file_image_192/img_192_01.png)
Description
The method of assessing fillet welds groups treating welds as lines is reasonably safe and conservative and is very convenient to use.
a) Weld subject to bending....See table below for typical unit areas and unit Moments of Inertia
A fillet weld subject to bending is easily assessed as follows.
1) The area of the fillet weld Au..(unit thickness) is calculated assuming the weld is one unit thick..
2) The (unit) Moment of Inertia Iu is calculated assuming the weld is one unit thick..
3) The maximum shear stress due to bending is determined...
4) The maximum shear stress due to direct shear is determined..
5) The resultant stress
6) By comparing the design stress Ss with the resultant stress
a) Weld subject to torsion...See table below for typical unit areas and unit Polar moments of Inertia
A fillet weld subject to torsion is easily assessed as follows.
1) The area of the fillet weld Au (unit thickness) is calculated assuming the weld is one unit thick
2) The (unit) Polar Moment of Inertia Ju is calculated assuming the weld is one unit thick.. The polar moment of inertia J = Ixx + Iyy
3) The maximum shear stress due to torsion is determined...
4) The maximum shear stress due to direct shear is determined..
5) The resultant stress
6) By comparing the design stress Ss with the resultant stress
Calculation Reference
Schaum's Outline - Machine Design
Calculation Preview
Full download access to any calculation is available to users with a paid or awarded subscription (XLC Pro).
Subscriptions are free to contributors to the site, alternatively they can be purchased.
Click here for information on subscriptions.